Patton-electronic 2085 Manual de usuario

USERMANUALSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart# 07M2085-DDoc# 047033UDRevised 4/15/97MODEL 2085High Spee

APPENDIX BPATTON MODEL 2085 RS-232 PIN CONFIGURATIONSCopyright ©Patton Electronics CompanyAll Rights Reserved1- (FG) Frame Ground2- (TD) Transmit Data

1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2085 components to befree from defects, and will—at our option—repair or replace the p

2.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product.This product has been thoroughly inspected and tested and iswar

3.1 SETTING THE DCE/DTE SWITCHFor your convenience, the Model 2085 has an externallyaccessible DCE/DTE switch. If the device connected to the Model2

3.4 CONFIGURATION SWITCH APPLICATIONSThe switch settings generallyneeded to configure the Model 2085for various applications are shown in the table b

4.0 INSTALLATIONOnce you have properly set the configuration switches, you areready to connect the Model 2085 to your system. This section tells you

4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS If your RS-485 application requires you to connect two pairs of barewires to the Model 2085, you will n

9. Insert the strain relief assembly with the wire going through itinto the slot in the bottom half of the modem case and set it into therecess in th

4.2.2 DAISY CHAIN TOPOLOGYUsing a daisy chain topology, you may connect several Model2085s together in a master/slave arrangement. Maximum distanceb